GULLCO INTERNATIONAL LIMITEDWorldwide Welding and Cutting Automation
All Categories > Weld Automation > KAT® Auto-Welding Automation Carriage > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

KAT® Auto-Welding Automation Carriage

Check up to five results to perform an action.

Download Product Brochure

The KAT® Carriage Auto-Weld enables a wide variety of automated welding cycles that can be repeatedly performed along any plane. The advanced Auto-Weld control monitors, via distance travelled, and responds to limit switches mounted on the KAT® which in turn respond to adjustable activators mounted at appropriate positions on the KAT® Track. Travel direction/speed and length of travel path are synchronized with precise weld start and weld stop settings. By combining different control settings and limit switch activator positions, a wide variety of welding cycles can be repeatedly performed. The KAT® Auto-Weld Combination is ideal for stitch welding and seam welding applications where repeatability and accuracy are desired. The reliability and precision of this automated welding system reduces cost, adds efficiency and improves quality.

KAT® Travel Carriage/Auto Weld Combination comprises:

Gullco Auto-Weld KAT® Travel Carriage with heavy duty self-aligning wheel assemblies, closed loop tack feed back for accurate speed control when running in any plane, regardless of load. Maximum 100lbs. (45kgs). Carriage is controlled by the new Gullco low voltage 24 volt GSP microprocessor pulsed width modulation motor control, interfacing with the forward/stop/reverse switch and infinitely variable 4- turn speed potentiometer. LED display in IPM or cm/min and with a ten position rotary switch to adjust various functions. (shown on other side of page) Operates on 42, 115 or 230 volts, single phase, 50/60 Hz A.C. power supply.

Limit Switches - 3 limit switches are mounted on the outside of the carriage. One each for forward, reverse and centre limit for weld start positioning and weld on/off activation.

Adjustable Park and End Limit Switch Activators - for mounting on Gullco KAT® Rigid or Flex Track. Centre limit switch activator(s) to be supplied by the customer.

Optional Remote Pendant Control Kit - Uses GSP control removed from KAT® Carriage...enabling remote operator control of the Auto-Weld unit.





   
  Results 1 - 18 of 18 1 

Item #

For Use On

Speed Range

Input Supply

GK-200-RLA-A Kat Rigid Track 0.5 to 16.4 IPM
1.2 to 41.6 cm/min
42 VAC
GK-200-RLB-A Kat Rigid Track 0.5 to 16.4 IPM
1.2 to 41.6 cm/min
115 VAC
GK-200-RLC-A Kat Rigid Track 0.5 to 16.4 IPM
1.2 to 41.6 cm/min
230 VAC
GK-200-RMA-A Kat Rigid Track 1 to 32.7 IPM
2.5 to 83.1 cm/min
42 VAC
GK-200-RMB-A Kat Rigid Track 1 to 32.7 IPM
2.5 to 83.1 cm/min
115 VAC
GK-200-RMC-A Kat Rigid Track 1 to 32.7 IPM
2.5 to 83.1 cm/min
230 VAC
GK-200-RHA-A Kat Rigid Track 2.7 to 88.4 IPM
6.7 to 224 cm/min
42 VAC
GK-200-RHB-A Kat Rigid Track 2.7 to 88.4 IPM
6.7 to 224 cm/min
115 VAC
GK-200-RHC-A Kat Rigid Track 2.7 to 88.4 IPM
6.7 to 224 cm/min
230 VAC
GK-200-FLA-A Kat Flexible Track 0.8 to 25.8 IPM
2 to 65.4 cm/min
42 VAC
GK-200-FLB-A Kat Flexible Track 0.8 to 25.8 IPM
2 to 65.4 cm/min
115 VAC
GK-200-FLC-A Kat Flexible Track 0.8 to 25.8 IPM
2 to 65.4 cm/min
230 VAC
GK-200-FMA-A Kat Flexible Track 1.5 to 51.5 IPM
3.9 to 131 cm/min
42 VAC
GK-200-FMB-A Kat Flexible Track 1.5 to 51.5 IPM
3.9 to 131 cm/min
115 VAC
GK-200-FMC-A Kat Flexible Track 1.5 to 51.5 IPM
3.9 to 131 cm/min
230 VAC
GK-200-FHA-A Kat Flexible Track 4.2 to 139.1 IPM
10.6 to 353 cm/min
42 VAC
GK-200-FHB-A Kat Flexible Track 4.2 to 139.1 IPM
10.6 to 353 cm/min
115 VAC
GK-200-FHC-A Kat Flexible Track 4.2 to 139.1 IPM
10.6 to 353 cm/min
230 VAC
  Results 1 - 18 of 18 1 
© 2013 Gullco International, All Rights Reserved Site created by Thomas Web Solutions and powered by Navigator Platform