Portable Trackless Welding Carriage - MOGGY® and Magnetic MOGGY®
Weld Automation
The Gullco MOGGY® friction drive travel carriage is designed to perform Horizontal Fillet Welding, Lap Welding and Butt Welding. It can be fitted with a Gullco Compact Oscillator to perform multi-pass welding. These operations can be performed on horizontal fillets with a minimum radius of 39 in. (1 meter) and up to a 30º incline. Following is a brief description of the Moggy and components that make up the system.
It is a lightweight, portable, four wheel friction drive travel carriage that can be used with or without track to automate welding operations. A speed potentiometer provides infinite speed selection within the 3.25-100.50 in/min (8.26-255.27 cm/min) range. The unit comes complete with adjustable guide rolls, travel limit switch assembly, vertical and horizontal slides providing 1 3/4" (44.4mm) adjustment and a semi-automatic gun holder. It is designed to run on a horizontal path against a vertical surface or a vertical path against a horizontal surface (Magnetic MOGGY®) to perform a fillet weld.
The Standard MOGGY® can be adapted for use on standard 6" (152.4mm) v-groove track by reversing the wheel assemblies. Safety is assured by using Gullco low voltage 24 volt DC highly advanced control power supply system that is available in 3 line voltage inputs ... 42, 115 and 230 volt AC 50/60 Hz.
Trackless Magnetic MOGGY® Trackless Welding Travel Carriage
"low cost, highly efficient automation of out-of-position fillet, lap and butt welding applications"
This Magnetic MOGGY® is essentially the same as the Standard MOGGY® described inside this folder except it has a magnetic base and heavy duty urethane 0.875" (22.23 mm) wide wheels for continuous travel in the horizontal and vertical position.
- Ideal for automatic horizontal fillet, lap and butt welding operations
- Controls are available to perform continuous and/or stitch weld operations
- Dual gun holder assembly is available for efficient simultaneous welding
- Wheels on the standard Moggy can be reversed to allow the moggy to run on standard v-groove track
- The magnetic moggy has a magnetic base that clings to the vertical member for out of position applications
The Gullco MOGGY® friction drive travel carriage is designed to perform Horizontal Fillet Welding, Lap Welding and Butt Welding. It can be fitted with a Gullco Compact Oscillator to perform multi-pass welding. These operations can be performed on horizontal fillets with a minimum radius of 39 in. (1 meter) and up to a 30º incline. Following is a brief description of the Moggy and components that make up the system.
It is a lightweight, portable, four wheel friction drive travel carriage that can be used with or without track to automate welding operations. A speed potentiometer provides infinite speed selection within the 3.25-100.50 in/min (8.26-255.27 cm/min) range. The unit comes complete with adjustable guide rolls, travel limit switch assembly, vertical and horizontal slides providing 1 3/4" (44.4mm) adjustment and a semi-automatic gun holder. It is designed to run on a horizontal path against a vertical surface or a vertical path against a horizontal surface (Magnetic MOGGY®) to perform a fillet weld.
The Standard MOGGY® can be adapted for use on standard 6" (152.4mm) v-groove track by reversing the wheel assemblies. Safety is assured by using Gullco low voltage 24 volt DC highly advanced control power supply system that is available in 3 line voltage inputs ... 42, 115 and 230 volt AC 50/60 Hz.
Trackless Magnetic MOGGY® Trackless Welding Travel Carriage
"low cost, highly efficient automation of out-of-position fillet, lap and butt welding applications"
This Magnetic MOGGY® is essentially the same as the Standard MOGGY® described inside this folder except it has a magnetic base and heavy duty urethane 0.875" (22.23 mm) wide wheels for continuous travel in the horizontal and vertical position.
Item # |
Type |
Speed Range |
Length |
Width |
Height |
Weight |
|---|---|---|---|---|---|---|
| GM-03-300 MOGGY® - Magnetic Base - Stitch and Continuous Welding Carriage | Type Magnetic | Speed Range 3.25 to 100.50 in/min8.26 to 255.27 cm/min | Length 17 in431.8 mm | Width 14 in355.7 mm | Height 12.9 in327.3 mm | Weight 31 lb14.1 kg |
| GM-03-100 MOGGY® - Stitch and Continuous Welding Carriage | Type Standard | Speed Range 3.25 to 100.50 in/min8.26 to 255.27 cm/min | Length 17 in431.8 mm | Width 14 in355.7 mm | Height 25 in635 mm | Weight 31 lb14.1 kg |
| GM-03-200 MOGGY® - Dual Torch - Stitch Welding or Continuous Welding | Type Dual Torch | Speed Range 3.25 to 100.50 in/min8.26 to 255.27 cm/min | Length 16 in406.4 mm | Width 12 in311.1 mm | Height 11 in279.4 mm | Weight 30 lb13.6 kg |
| GM-05-100 Battery Powered Welding Automation - MOGGY® Carriage | Type Battery Powered | Speed Range 3.25 to 100.50 in/min8.26 to 255.27 cm/min | Length N/A | Width N/A | Height N/A | Weight N/A |
