Gullco International
Gullco International
1175 Nicholson Road Newmarket Ontario, L3Y 9C3
Ph: 905.953.4140
Fax: 905.953.4138
Email: sales@gullco.com
Print Back
Plate Bevelers, Self Propelled, Portable - KBM-18® produce clean machined bevels with no thermal distortion on mild steel, stainless steel and aluminum plate from 1/4" (6.0 mm) to 1 1/2" (38.1 mm) thick. Thinner material can be beveled... consult factory for details. The KBM-18® bevels the topside of plate reducing time and cost. Savings are further enhanced when the topside Beveler is used with the KBM-18U underside beveler in applications where both sides of the material require beveling.

Adjustable Undercarriage...For Easy Height Adjustment
The KBM-18® can be purchased with a adjustable height, self-aligning, spring-loaded caster wheel assembly for self propelled Beveling along any length of plate maintaining a uniform bevel and consistent root face. Undercarriage sold separate

Angle Bevel Pins...Enable Bevel Angle Adjustment
...KBM-18® units are supplied with a 30º angle bevel pin and can be supplied with bevel angle pins for 22 1/2º, 30º, 37 1/2º, 45º and 55º bevels. Pins for other bevel angles are available upon request.

KBM-18U Underside Beveling

The KBM-18U is perfect for beveling the underside of the plate without need for flipping the work piece over. In combination with the KBM-18 efficiency is greatly increased when Beveling both the top and bottom of the plate. Safety is also increased as there is no need for constant maneuvering of heavy workloads.

Operates at 10 feet (3 meters) per minute

KBM-18® can be supplied with the following standard equipment:
1- KBM-18-X1C Mild Steel Cutter
1- set Bevel Angle Pins for 22 1/2º, 30º, 37 1/2º, 45º and 55º
1- Tool Kit
Unit of Measure

Specifications

Type

 N/A Plate Beveller

Angle

 N/A 22 1/2 º30 º37 1/2 º45 º55 º

Maximum Bevel Width

 N/A .71 in18 mm

Maximum Bevel Depth

 N/A .61 in15.6 mm

Min. Plate Thickness

 N/A 1/4 in6.3 mm

Max. Plate Thickness

 N/A 1 1/2 in38.1 mm

Bevel Speed

 N/A 118.1 in/min300 cm/min

Motor

 N/A 2 HP, 3 phase, available for 230, 460 and 575V~ at 60Hz and also 380 and 400/415V~ at 50Hz supply

Weight

 N/A 337 lb153 kg

Complies with

 N/A C.S.A./N.R.T.L. (File # LR 35006-6) and C.E. Regulations