Plate Bevelers, Self Propelled, Portable - KBM-18® produce clean machined bevels with no thermal distortion on mild steel, stainless steel and aluminum plate from 1/4" (6.0 mm) to 1 1/2" (38.1 mm) thick. Thinner material can be beveled... consult factory for details. The KBM-18® bevels the topside of plate reducing time and cost. Savings are further enhanced when the topside Beveler is used with the KBM-18U underside beveler in applications where both sides of the material require beveling.

Adjustable Undercarriage...For Easy Height Adjustment
The KBM-18® can be purchased with a adjustable height, self-aligning, spring-loaded caster wheel assembly for self propelled Beveling along any length of plate maintaining a uniform bevel and consistent root face. Undercarriage sold separate

Angle Bevel Pins...Enable Bevel Angle Adjustment
...KBM-18® units are supplied with a 30º angle bevel pin and can be supplied with bevel angle pins for 22 1/2º, 30º, 37 1/2º, 45º and 55º bevels. Pins for other bevel angles are available upon request.

KBM-18U Underside Beveling

The KBM-18U is perfect for beveling the underside of the plate without need for flipping the work piece over. In combination with the KBM-18 efficiency is greatly increased when Beveling both the top and bottom of the plate. Safety is also increased as there is no need for constant maneuvering of heavy workloads.

Operates at 10 feet (3 meters) per minute

KBM-18® can be supplied with the following standard equipment:
1- KBM-18-X1C Mild Steel Cutter
1- set Bevel Angle Pins for 22 1/2º, 30º, 37 1/2º, 45º and 55º
1- Tool Kit

Gullco's Portable, Underside, Self-Propelled Plate Beveler KBM-18U® produces clean machined bevels with no thermal distortion on mild steel, stainless steel and aluminum plate from 1/4" (6.0 mm) to 1 1/2" (38.1 mm) thick. Thinner material can be beveled... consult factory for details. The KBM-18® bevels the topside of the plate eliminating the need to flip the work piece...reducing time and cost. Savings are further enhanced when both units are used in applications where both sides of the material require beveling.

Adjustable Undercarriage...For Easy Height Adjustment
The KBM-18® can be purchased with a hydraulic adjustable height, self-aligning, spring-loaded caster wheel assembly for self propelled beveling along any length of plate maintaining a uniform bevel and consistent root face. Undercarriage sold separate

Angle Bevel Pins...Enable Bevel Angle Adjustment
...KBM-18®; units are supplied with a 30º angle bevel pin and can be supplied with angle pins for 22 1/2º, 30º, 37 1/2º, 45º and 55º bevels. Pins for other bevel angles are available upon request.

Operates at 10 feet (3 meters) per minute

KBM-18® can be supplied with the following standard equipment:
1- KBM-18-X1C Cutter (medium cut)
1- Set Bevel Angle Pins for 22 1/2º, 30º, 37 1/2º, 45º and 55º
1- Tool Kit

Plate Edge Bevelers, Heavy Duty, Portable, Self-Propelled - KBM-28® produce clean machined bevels with no thermal distortion on mild steel, stainless steel and aluminum plate from 5/16" (8.0 mm) to 2" (50.0 mm) thick. The KBM-28® bevels the topside of plate reducing time and cost. Savings are further enhanced when the topside Beveler is used with the KBM-28U underside Beveler in applications where both sides of the material require beveling.

Adjustable Undercarriage...For Easy Height Adjustment
The KBM-28® units can be purchased with Gullco's exclusive adjustable height self-aligning springloaded caster wheel assembly for self-propelled beveling along any length of plate maintaining a uniform bevel and consistent root face. Sold separate

Angle Bevel Pins...Enable Bevel Angle Adjustment
...KBM-28® units are supplied with a 30º angle bevel pin and can be supplied with angle bevel pins for 22 1/2º, 30º, 37 1/2º, 45º and 55º bevels. Pins for other bevel angles are available upon request.

Hydraulic Adjustable Undercarriage
For easy height adjustment

KBM-28 units can be supplied with choice of undercarriages. Both are supplied with Gullco exclusive self-aligning caster wheel assemblies for self propelled beveling along the length of the plate, maintaining a uniform bevel and consistent root face. Undercarriage sold separate.

Best suited for applications when frequent height adjustments are required.

Adjustable undercarriage supplied with Gullco's adjustable height self-aligning spring-loaded caster wheel assemblies for self-propelled operation. Best suited for applications where constant machine height is required.

KBM-28 U

The KBM-28U is perfect for beveling the underside of the plate without need for flipping the work piece over. In combination with the KBM-28 efficiency is greatly increased when beveling both the top and bottom of the plate.

Operates at 6.5 feet (2 meters) per minute

KBM-28® can be supplied with the following standard equipment:
1- KBM-28-X1C Mild Steel Cutter
1- Set Bevel Angle Pins for 22 1/2º, 30º, 37 1/2º, 45º and 55º
1- Tool Kit

Operates at 6.5 feet (2 meters) per minute

Underside Plate Edge Bevelers - Heavy Duty, Portable, Self-Propelled - KBM-28U®produces clean machined bevels with no thermal distortion on mild steel, stainless steel and aluminum plate from 5/16” (8.0 mm) to 2” (50.0 mm) thick. The KBM-28® bevels the topside of the plate eliminating the need to flip the workpiece…reducing time and cost. Savings are further enhanced when both units are used in applications where both sides of the material require beveling.

Adjustable Undercarriage...For Easy Height Adjustment
The KBM-28U® units can be purchased with Gullco’s exclusive hydraulic, adjustable height, self-aligning undercarriage assembly for self-propelled beveling along any length of plate maintaining a uniform bevel and consistent root face. Sold separate

Hydraulic Adjustable Undercarriage
Best suited for applications when frequent height adjustments are required.

Adjustable undercarriage supplied with Gullco’s adjustable height self-aligning spring-loaded caster wheel assemblies for self-propelled operation. Best suited for applications where constant machine height is required.

Angle Bevel Pins…Enable Bevel Angle Adjustment
...KBM-28U® units are supplied with a 30° angle bevel pin and can be supplied with angle bevel pins for 22 1/2°, 30°, 37 1/2°, 45° and 55° bevels. Pins for other bevel angles are available upon request.

KBM-28® can be supplied with the following standard equipment:
1- KBM-28-X1C Cutter (medium cut)
1- Set Bevel Angle Pins for 22 1/2°, 30°, 37 1/2°, 45°and 55 °
1- Tool Kit

The GULLCO® KAT®100 automation carriage is the major component of an automated system designed to improve welding and cutting applications by increasing quality and reducing the cost of operations by increasing productivity.

Operator safety is greatly enhanced by the use of GULLCO® low voltage (24 VDC) control and switch-mode power supply integration. The carriage consists of a low voltage 24 VDC permanent magnet gear motor which engages the track through a set of spur gears. An easy to engage clutch lever permits free-wheeling of the carriage for rapid positioning. The carriage is designed to run on a rigid KAT® track to provide stable consistent results.

KAT®100 series carriages come in 2 models to automate both welding and cutting applications along with a variety of accessories to help improve efficiency including torch positioning and movement as well as arc start integration.

The simplest in the series of KAT® mechanized automation. The 100 is designed to be an entry-level carriage with a simple setup, minimal control complexity, and quickly integrates into a variety of welding and cutting applications.

SPECIFICATIONS

Speed Range: 1 – 85.5 in/min [2.5 – 217.2 cm/min] No Load Horizontal 2 - 72 in/min [5.1 – 182.9 cm/min] Full Load Vertical

Weight of Carriage: 13.2 lbs. [6 kg]

Vertical Load Capacity: 50 lbs. [23 kg]

Motor: 24 VDC permanent magnet gear motor

Supply Voltage: 85 to 264 VAC, single phase, 50/60 Hz.

Complies with: CE Certification