KAT Automation Carriage | Radial and Linear Weld Oscillation
This advanced weld oscillation system is designed to increase production and improve the quality of the weld produced in automatic mechanized welding operations by minimizing weld defects such as poor penetration, incomplete fusion, overlap and undercut.
The GK-200 Series automation ;carriages come with the option for linear or radial oscillation head and can be equipped for use on either rigid or flexible track.
The oscillator is available with a linear, pendulum, tangential or step (square pattern) motion to the welding gun with adjustable motorized stroke width, infinitely variable stroke speed adjustment, three independent position dwell times, motorized centre line positioning and automatic wire feed start and travel start/stop interface.
By combining welding gun oscillation movement with the precision controlled travel speed of the KAT® carriage increased weld quality and consistency can be achieved while reducing the overall production cost of the welding application. Up to 10 weld programs can be produced and stored.
Flat or Curved Surface Weld Oscillation | All Position Welding
The KAT® Weld Oscillation Automation Carriage ;is comprised of the Compact Oscillator head, controls, mounting brackets, connecting cable, 1-1/8" heavy duty micro fine rack boxes with rack arms for horizontal and vertical adjustments and standard MIG gun holder, together with a KAT® carriage for rigid track or flex track as shown above.
GK-200-F: Carriages are supplied with a KAT® specifically designed for operation on spring steel KAT® Flexible Track.
GK-200-R: Carriages are supplied with a KAT® specifically designed for operation on rigid aluminum KAT® Track.
All are equipped with the Gullco microprocessor-based programmable control with a closed loop feedback for complete speed accuracy regardless of load [0-100 lbs. (45kgs)] when operating in any weld position.
Exclusive Tangential and Pendulum or Linear Motion
The oscillator heads are capable of producing three distinct motions when mounted in either the horizontal or vertical position.
Motorized Centre Line Adjustment
With independent, electronically controlled dwells (0-5sec.) at each end of the stroke and at the centre of the stroke path. The proper torch angle/position is established quickly and easily with the KAT® oscillation heads. It's simply a matter of tilting the oscillator, which can be adjusted side to side or forward/backward...eliminating the time consuming and generally ineffective procedure of tilting the carriage or track.
Motorized Stroke Width
Easy, precise adjustment to provide the required weld pattern.
Oscillation Speed Control
Oscillation speed electronically controlled by speed potentiometer, 140 inches per minutes (linear) 45" per second (radial).
GK-201-100-RC Separate Remote Controlled Compact Oscillator Assembly - Linear or Radial
This assembly is comprised of either a ;linear or radial oscillator head with MIG gun holder, remote control box, control cable (up to 20ft), micro fine rack boxes, rack arms: and brackets. It can be mounted on existing KAT® automation carriage, welding head manipulators, side beam carriages, etc.
Combine High Precision With Exceptional Versatility
High Precision, state-of-the-art controls on the KAT® carriage automatically direct the desired forward / reverse movement or dwell of the welding gun and its oscillation motion to produce the numerous weld patterns shown below. The carriage control enables the carriage speed and direction to be pre-set and shown on its highly visible LED display in ipm or cm/min. The oscillator controls at right enable pre-setting and carriage delay / start after wire feed start, dwell times, stroke speed, stroke width, program storage and cycle start.
|GK-200-R - Linear Oscillator||Model Linear Oscillator - Rigid Track||Speed Range 1.2 to 224 cm/min||Input Supply 42, 115 or 230 VAC||Option KAT® Carriage Linear Weld Oscillation Head Rigid Track|
|GK-200-F - Linear Oscillator||Model Linear Oscillator - Flexible Track||Speed Range 2 to 353 cm/min||Input Supply 42, 115 or 230 VAC||Option Flex KAT Carriage Linear Weld Oscillator Head|
|GK-200-R - Radial Oscillator||Model Radial Oscillator - Rigid Track||Speed Range 2 to 224 cm/min||Input Supply 42, 115 or 230 VAC||Option KAT Carriage Radial Weld Oscillator Head|
|GK-200-F - Radial Oscillator||Model Radial Oscillator - Flexible Track||Speed Range 2 to 353 cm/min||Input Supply 42, 115 or 230 VAC||Option Flex KAT Carriage Radial Weld Oscillator Head|
|GK-201-100-RC - Remote Control||Model Remote Control Oscillator||Speed Range N/A||Input Supply 42, 115 or 230 VAC||Option Linear or Radial Head|