- Ideal for automatic horizontal fillet, lap and butt welding operations
- Controls are available to perform continuous and/or stitch weld operations
- Dual gun holder assembly is available for efficient simultaneous welding
- Wheels on the standard Moggy can be reversed to allow the moggy to run on standard v-groove track
- The magnetic moggy has a magnetic base that clings to the vertical member for out of position applications
The Gullco MOGGY® friction drive travel carriage is designed to perform Horizontal Fillet Welding, Lap Welding and Butt Welding. It can be fitted with a Gullco Compact Oscillator to perform multi-pass welding. These operations can be performed on horizontal fillets with a minimum radius of 39 in. (1 meter) and up to a 30º incline. Following is a brief description of the Moggy and components that make up the system.
It is a lightweight, portable, four wheel friction drive travel carriage that can be used with or without track to automate welding operations. A speed potentiometer provides infinite speed selection within the 6 to 115 in/min (15.2 to 292.2 cm/min) range. The unit comes complete with adjustable guide rolls, travel limit switch assembly, vertical and horizontal slides providing 1 3/4" (44.4mm) adjustment and a semi-automatic gun holder. It is designed to run on a horizontal path against a vertical surface or a vertical path against a horizontal surface (Magnetic MOGGY®) to perform a fillet weld.
The Standard MOGGY® can be adapted for use on standard 6" (152.4mm) v-groove track by reversing the wheel assemblies. Safety is assured by using Gullco low voltage 24 volt DC highly advanced control power supply system that is available in 3 line voltage inputs ... 42, 110 and 230 volt AC 50/60 Hz.
Trackless Magnetic MOGGY® Trackless Welding Travel Carriage
"low cost, highly efficient automation of out-of-position fillet, lap and butt welding applications"
This Gullco MOGGY® is essentially the same as the Standard MOGGY® described inside this folder except it has a magnetic base and heavy duty urethane 0.875" (22.23 mm) wide wheels for continuous travel in the horizontal and vertical position.
|GM-03-100||Type N/A Standard||Speed Range N/A 5.8 to 115 in/min14.6 to 292 cm/min||Length N/A 17 in431.8 mm||Width N/A 14 in355.7 mm||Height N/A 25 in635 mm||Weight N/A 31 lb14.1 kg|
|GM-03-300||Type N/A Magnetic||Speed Range N/A 3 to 54 in/min7.6 to 137 cm/min||Length N/A 17 in431.8 mm||Width N/A 14 in355.7 mm||Height N/A 12.9 in327.3 mm||Weight N/A 31 lb14.1 kg|
|GM-03-200||Type N/A Dual Torch||Speed Range N/A 6 to 115 in/min15.2 to 292.2 cm/min||Length N/A 16 in406.4 mm||Width N/A 12 in311.1 mm||Height N/A 11 in279.4 mm||Weight N/A 30 lb13.6 kg|