Request Information
  • Rack Box 2

    Rack Boxes

    (4)

  • Rack Box for Arm Mounting

    Rack Boxes for Arm Mounting

    (4)

  • Rack Arms

    Rack Arms

    (7)

    1 1/8" (29mm) and 1 1/2" (38 mm) square rack arm and rack with one end turned to 1 1/8" (29mm) diameter.

  • Swivel Clamp

    for mounting torch holders, rack boxes and other "KAT" accessories

  • Square Clamp

    Square Clamps

    (2)

    for mounting welding guns, cutting torches and other "KAT" accessories

  • Rack Box Riser

    For applications that require a mounting surface higher than the level provided with the rack box mounted directly on the front of the Kat Carriage. Height can be increased by 2, 4 or 6" (51, 102 or 152 mm).

  • 4 Motion Gun Holder

    Complete Unit for mounting on the KAT® Automation Carriage horizontal rack arm to provide 5" (127 mm) of vertical adjustment, 360º; torch rotation and two directional tilt. Supplied complete with standard 1 1/8" (29 mm) I.D. swivel clamp* and insulated linkage for the gun holder which is suitable for most semi-automatic welding guns. Gun holder jaws are adjustable from 5/8" (16 mm) to 1 1/2" (38 mm)

    *Note: can be supplied with 1 1/8" (29 mm) or 1 1/2" (38 mm) square clamp

  • Semi Automatic Gun Holder

    Complete with standard 1 1/8" (29 mm) I.D. swivel clamp* and insulated linkage for the gun holder which is suitable for most semi-automatic welding guns. Gun holder jaws are adjustable from 5/8" (16 mm) to 1 1/2" (38 mm)

    *Note: can be supplied with 1 1/8"; (29 mm) or 1 1/2" (38 mm) square clamp

  • Idler Carriage

    Provides an 8 3/4" X 14 7/8" platform on which a variety of welding and cutting automation equipment can be mounted and towed individually or in tandem along straight or formed sections of KAT® Track by the Gullco KAT® Automation Carriage. Self aligning retractable wheels enable easy mounting at any point along the track. Load capacity is 100 lbs.

  • Remote Pendant

    Supplied with 8 ft. (2438.4mm) cable providing control of numerous KAT functions.

  • Cutting Torch Holder

    Accepts standard 1 3/8" (35 mm) cutting torches with 32 pitch rack. Supplied with calibrated angle of tilt scale and 1 1/8" (29 mm)* swivel clamp for mounting on rack arm. * can be supplied with 1 1/8" (29 mm) or 1 1/2" (38 mm) square clamp.

  • Cable Support Clamp

    Swivel clamp assembly is readily mounted on front/back of the "KAT" Travel Carriage to keep cables clear of the work area. Clamp can be adjusted to provide approximately 1 3/4" diameter holder opening.