Portable Trackless Welding Carriage - MOGGY® and Magnetic MOGGY® On Gullco International, Inc.

All Categories > Weld Automation > Portable Trackless Welding Carriage - MOGGY® and Magnetic MOGGY®


	Portable Trackless Welding Carriage - MOGGY® and Magnetic MOGGY®

larger image

Ideal for automatic horizontal fillet, lap and butt welding operations
Controls are available to perform continuous and/or stitch weld operations
Dual gun holder assembly is available for efficient simultaneous welding
Wheels on the standard Moggy can be reversed to allow the moggy to run on standard v-groove track
The magnetic moggy has a magnetic base that clings to the vertical member for out of position applications

MOGGY® Automated Trackless Welding Carriage

The Gullco MOGGY® friction drive travel carriage is designed to perform Horizontal Fillet Welding, Lap Welding and Butt Welding. It can be fitted with a Gullco Compact Oscillator to perform multi-pass welding. These operations can be performed on horizontal fillets with a minimum radius of 39 in. (1 meter) and up to a 30º incline. Following is a brief description of the Moggy and components that make up the system.

It is a lightweight, portable, four wheel friction drive travel carriage that can be used with or without track to automate welding operations. A speed potentiometer provides infinite speed selection within the 3.25-100.50 in/min (8.26-255.27 cm/min) range. The unit comes complete with adjustable guide rolls, travel limit switch assembly, vertical and horizontal slides providing 1 3/4" (44.4mm) adjustment and a semi-automatic gun holder. It is designed to run on a horizontal path against a vertical surface or a vertical path against a horizontal surface (Magnetic MOGGY®) to perform a fillet weld.

The Standard MOGGY® can be adapted for use on standard 6" (152.4mm) v-groove track by reversing the wheel assemblies. Safety is assured by using Gullco low voltage 24 volt DC highly advanced control power supply system that is available in 3 line voltage inputs ... 42, 115 and 230 volt AC 50/60 Hz.

Trackless Magnetic MOGGY® Trackless Welding Travel Carriage

"low cost, highly efficient automation of out-of-position fillet, lap and butt welding applications"

This Magnetic MOGGY® is essentially the same as the Standard MOGGY® described inside this folder except it has a magnetic base and heavy duty urethane 0.875" (22.23 mm) wide wheels for continuous travel in the horizontal and vertical position.

Item #

Type

Speed Range

Length

Width

Height

Weight

GM-03-300

Magnetic

3.25 to 100.50 in/min
8.26 to 255.27 cm/min

17 in
431.8 mm

14 in
355.7 mm

12.9 in
327.3 mm

31 lb
14.1 kg

GM-03-100

Standard

3.25 to 100.50 in/min
8.26 to 255.27 cm/min

17 in
431.8 mm

14 in
355.7 mm

25 in
635 mm

31 lb
14.1 kg

GM-03-200

Dual Torch

3.25 to 100.50 in/min
8.26 to 255.27 cm/min

16 in
406.4 mm

12 in
311.1 mm

11 in
279.4 mm

30 lb
13.6 kg

GM-05-100

Battery Powered

3.25 to 100.50 in/min
8.26 to 255.27 cm/min

N/A

MORE IMAGES


	· GM-03-050- MOGGY®

	· Moggy Automated Welding System

	· Precise Torch Alignment To The Seam

	· Typical Configurations

	· GM-03-200 Dual Torch MOGGY®

DOWNLOADS


		MOGGY - Features Brochure.pdf (PDF, 846KB)

		MOGGY - Battery Powered Weld Carriage.pdf (PDF, 544KB)

		MOGGY - Magnetic Fillet Weld Carriage.pdf (PDF, 533KB)

		MOGGY - Standard Fillet Weld Carriage.pdf (PDF, 1893KB)

		MOGGY® Manual (PDF, 1782KB)

Accessories available


	Radial Oscillator

	Adjustable Guide Roller Assembly
more available ..