Carriage Features:
- Integrated Wire Feeder for Improved Effiecency and Productivity
- Holds up to 12" Diameter Spools
- Continuous or Stitch Welding Modes
- Step Back Feature Reduces Weld Cracks
- Programmable Control

Additional carriage options are available:

- Lap Weld Guide Wheels
- Attachment for Internal Radius Welding
- Protective Pelican® Case
- V-Groove Track

The 400 MOGGY® is a trackless welding carriage with an integrated wire feeder, used to automate and improve manual welding processes in Shipbuilding, Tank Construction, and other heavy fabrication applications. The carriage is a lightweight, portable, four wheel friction drive travel carriage that can be used with or without track to automate welding operations. A speed potentiometer provides infinite speed selection within the speed range. The 400 MOGGY® can be adapted for use on standard 6" (152.4mm) v-groove track by reversing the wheel assemblies. Safety is assured by using Gullco low voltage 24 volt DC highly advanced control power supply system that is available in 3 line voltage inputs 42, 110 and 230 volt AC 50/60 Hz.

Carriage Travel Speed:
1.6 to 54 IPM (4 to 137 cm/m)

Wire Feed Speed Range:
24 to 791 IPM (0.6 to 20 m/m)

Manual Adjustment Vertical and Horizontal Slides:
1-3/4" (44.4 mm) adjustable range

Welding Spool Size:
The standard spool holder, 2" (50 mm) hub diameter,
will accept both 8" and 12" diameter wire spools

Wire Feeder Drive Rolls:
0.8 mm to 1.6 mm V-groove wheels, 1.0 mm to 2.0 mm V-groove knurled wheels
(1.0/1.2 mm V-groove knurled comes standard, see chart on reverse for available options)

Carriage Umbilical:
25 ft. (7.6 m) in length and protected by a 500ºC (932ºF) rated cover. Contains torch power cable, shielding gas hose, carriage power cable, arc start cable, and water hoses if equipped

Optional 400 MOGGY® Carrying Case (Pelican):

Please specify line voltage when ordering.
(see part number configuration)